PO Box 5166 Canning Vale, Western Australia 6155 t. 08 9456 0200 f. 08 9456 0511 e.
Home
MNCG1060A Operate Support Equipment - Backhoe
Backhoe Loader courses are run as required at our Guildford training school or at clients premises by arrangement.
Options include:
- Two to three hour assessments for experienced operators.
- One day training and assessment courses designed to impart basic skills to novice operators.
- Tailored training such as refresher courses or specific task techniques.
Our courses typically cover:
- Pre-start check items
- Startup and shutdown procedures
- Dash layout and each function explained in detail
- Identification of machine components
- How to utilise machine power to fill the bucket effectively
- Correct digging techniques for effective backhoe operation
- The correct housekeeping necessary to work quickly and efficiently
- How to skim the ground in cleanup operations without excessive down pressure
- How to avoid wheel spin and tyre damage
- All aspects of safety with machine operation
;)
Our one day training course will usually provide novice trainees with sufficient basic skills to earn a statement of attainment in loader backhoe operations. The time required to train people does vary though, depending on their level of hand – eye coordination, and their ability to adapt to new ideas and techniques. Additional training is of course available if required.
After successful completion of your course you will be issued with a Statement Of Attainment and a plastic, wallet sized card stating the unit achieved. All units can contribute towards completion of MNM20105 Certificate II and/or MNM30105 Certificate III in metalliferous mining.
MNMOLH307A Conduct Dozer Operations
Dozer courses are run on site at clients’ premises by arrangement.
Options include:
;)
- Two to three hour assessments for experienced operators.
- One day training and assessment courses designed to impart basic skills to novice operators.
- Tailored training such as refresher courses or specific task techniques.
Our courses typically cover:
- Pre-start check items
- Startup and shutdown procedures
- Dash layout and each function explained in detail
- Identification of machine components
- The correct housekeeping necessary to work quickly and efficiently
- Correct use of blade and ripper
- All aspects of safety with machine operation
Our one day training course will usually provide novice trainees with sufficient basic skills to earn a statement of attainment in dozer operations. The time required to train people does vary though, depending on your level of hand – eye coordination, and your ability to adapt to new ideas and techniques. Additional training is of course available if required.
After successful completion of your course you will be issued with a Statement Of Attainment and a plastic, wallet sized card stating the unit achieved. All units can contribute towards completion of MNM20105 Certificate II and/or MNM30105 Certificate III in metalliferous mining.
MNMOLH306A – Conduct Haul Truck Operations
Dump truck training is undertaken at a working mining site just outside of Perth using Caterpillar and Komatsu 50 tonne rear dump trucks. Only two trainees are taken per course, which runs for four or five days depending on long weekends.
During the course you will complete up to fifty hours of classroom and practical sessions, around forty to forty five of which is driving time, hauling up to and in excess of 300 loads. You will be loaded by wheel loader or excavator and haul loads to the crusher, stockpile or waste dumps, interacting with other personnel by two way radio, exactly as you will on any mine site. By the end of the week you will have a very good understanding of how a typical mine works through actually participating in the mining process.
;)
Our course covers
- Conducting of pre and post start checks
- Identification of major components of the dump truck
- A basic understanding of hydraulics
- Techniques for maximising efficiency and productivity
- All aspects of safety relating to dump truck operation
- An understanding of Occupational Health And Safety requirements
A current drivers licence is a pre-requisite to starting the course. Prior to gaining work in the mining industry in Western Australia you may need to obtain a HR drivers licence and complete a MARCSTA induction. You may also be required to obtain a mines health clearance, a police clearance and pass a drugs test.
After successful completion of your course you will be issued with a Statement Of Attainment and a plastic, wallet sized card stating the unit achieved. All units can contribute towards completion of MNM20105 Certificate II and/or MNM30105 Certificate III in metalliferous mining.
MNMOLH301A – Conduct Excavator Operations
Excavator courses are run as required at our Guildford training school or at clients premises by arrangement.
Options include:
;)
- Two to three hour assessments for experienced operators.
- One day training and assessment courses designed to impart basic skills to novice operators.
- Tailored training such as refresher courses or specific task techniques.
Our courses typically cover:
- Pre-start check items
- Startup and shutdown procedures
- Dash layout and each function explained in detail
- Identification of machine components
- Correct digging techniques for effective excavator operation
- The correct housekeeping necessary to work quickly and efficiently
- All aspects of safety with machine operation
Our one day training course will usually provide novice trainees with sufficient basic skills to earn a statement of attainment in excavator operations. The time required to train people does vary though, depending on your level of hand – eye coordination, and your ability to adapt to new ideas and techniques. Additional training is of course available if required.
After successful completion of your course you will be issued with a Statement Of Attainment and a plastic, wallet sized card stating the unit achieved. All units can contribute towards completion of MNM20105 Certificate II and/or MNM30105 Certificate III in metalliferous mining.
MNMOMS306A Conduct Grader Operations
Grader courses are run on site at clients’ premises by arrangement.
Options include:
;)
- Two to three hour assessments for experienced operators.
- One day training and assessment courses designed to impart basic skills to novice operators.
- Tailored training such as refresher courses or specific task techniques.
Our courses typically cover:
- Pre-start check items
- Startup and shutdown procedures
- Dash layout and each function explained in detail
- Identification of machine components
- Techniques required to grade and maintain roads to a safe standard
- The correct housekeeping necessary to work quickly and efficiently
- Ripping, pre mixing, water binding and other job requirements
- How to avoid wheel spin and tyre damage
- All aspects of safety with machine operation
Our one day training course will usually provide novice trainees with sufficient basic skills to earn a statement of attainment in grader operations. The time required to train people does vary though, depending on your level of hand – eye coordination, and your ability to adapt to new ideas and techniques. Additional training is of course available if required.
After successful completion of your course you will be issued with a Statement Of Attainment and a plastic, wallet sized card stating the unit achieved. All units can contribute towards completion of MNM20105 Certificate II and/or MNM30105 Certificate III in metalliferous mining.
MNMG347A – Conduct Integrated Tool Carrier Operations
Loader/ Tool Carrier courses are run as required at our Guildford training school or at clients premises by arrangement.
;)
Options include:
- Two to three hour assessments for experienced operators.
- One day training and assessment courses designed to impart basic skills to novice operators.
- Tailored training such as refresher courses or specific task techniques.
Our courses typically cover:
- Pre-start check items
- Startup and shutdown procedures
- Dash layout and each function explained in detail
- Identification of machine components
- How to utilise machine power to fill the bucket effectively
- Changeover and basic use of attachments like forks, crane jib etc.
- The correct housekeeping necessary to work quickly and efficiently
- How to skim the ground in cleanup operations without excessive down pressure
- How to avoid wheel spin and tyre damage
- All aspects of safety with machine operation
Our one day training course will usually provide novice trainees with sufficient basic skills to earn a statement of attainment in tool carrier operations. The time required to train people does vary though, depending on your level of hand – eye coordination, and your ability to adapt to new ideas and techniques. Additional training is of course available if required.
After successful completion of your course you will be issued with a Statement Of Attainment and a plastic, wallet sized card stating the unit achieved. All units can contribute towards completion of MNM20105 Certificate II and/or MNM30105 Certificate III in metalliferous mining.
MNMOLH305A - Conduct Front End Loader Operations
Front End Loader courses are run as required at our Guildford training school or at clients’ premises by arrangement.
;)
Options include:
- Two to three hour assessments for experienced operators.
- One day training and assessment courses designed to impart basic skills to novice operators.
- Tailored training such as refresher courses or specific task techniques.
Our courses typically cover:
- Pre-start check items
- Startup and shutdown procedures
- Dash layout and each function explained in detail
- Identification of machine components
- How to utilise machine power to fill the bucket effectively
- The correct housekeeping necessary to work quickly and efficiently
- How to skim the ground in cleanup operations without excessive down pressure
- How to avoid wheel spin and tyre damage
- All aspects of safety with machine operation
Our one day training course will usually provide novice trainees with sufficient basic skills to earn a statement of attainment in loader operations. The time required to train people does vary though, depending on your level of hand – eye coordination, and your ability to adapt to new ideas and techniques. Additional training is of course available if required.
After successful completion of your course you will be issued with a Statement Of Attainment and a plastic, wallet sized card stating the unit achieved. All units can contribute towards completion of MNM20105 Certificate II and/or MNM30105 Certificate III in metalliferous mining.
MNMOMS204A - Operate Roller/ Compactor
Roller/ compactor courses are run as required at our Guildford training school or at clients premises by arrangement.
;)
Options include:
- Two to three hour assessments for experienced operators.
- One day training and assessment courses designed to impart basic skills to novice operators.
- Tailored training such as refresher courses or specific task techniques.
Our courses typically cover:
- Pre-start check items
- Startup and shutdown procedures
- Dash layout and each function explained in detail
- Identification of machine components
- Correct use of vibration in compaction
- The correct housekeeping necessary to work quickly and efficiently
- Compaction of material to job specifications
- Types of roller required to achieve the various job requirements
- All aspects of safety with machine operation
Our one day training course will usually provide novice trainees with sufficient basic skills to earn a statement of attainment in roller/ compactor operations. The time required to train people does vary though, depending on your level of hand – eye coordination, and your ability to adapt to new ideas and techniques. Additional training is of course available if required.
After successful completion of your course you will be issued with a Statement Of Attainment and a plastic, wallet sized card stating the unit achieved. All units can contribute towards completion of MNM20105 Certificate II and/or MNM30105 Certificate III in metalliferous mining.
MNMOLH308A - Conduct Scraper Operations
Scraper courses are run on site at clients’ premises by arrangement.
Options include:
;)
- Two to three hour assessments for experienced operators.
- One day training and assessment courses designed to impart basic skills to novice operators.
- Tailored training such as refresher courses or specific task techniques.
Our courses typically cover:
- Pre-start check items
- Startup and shutdown procedures
- Dash layout and each function explained in detail
- Identification of machine components
- Bowl filling techniques
- Discharging techniques for various job requirements
- Difference between open bowl, auger, elevating, and push pull scrapers
- Working with push dozers
- All aspects of safety with machine operation
Our one day training course will usually provide novice trainees with sufficient basic skills to earn a statement of attainment in scraper operations. The time required to train people does vary though, depending on your level of hand – eye coordination, and your ability to adapt to new ideas and techniques. Additional training is of course available if required.
After successful completion of your course you will be issued with a Statement Of Attainment and a plastic, wallet sized card stating the unit achieved. All units can contribute towards completion of MNM20105 Certificate II and/or MNM30105 Certificate III in metalliferous mining.
MNCG1060A Operate Support Equipment – Skid Steer Loader
Skid Steer Loader courses are run as required at our Guildford training school or at clients premises by arrangement.
;)
Options include:
- Two to three hour assessments for experienced operators.
- One day training and assessment courses designed to impart basic skills to novice operators.
- Tailored training such as refresher courses or specific task techniques.
Our courses typically cover:
- Pre-start check items
- Startup and shutdown procedures
- Dash layout and each function explained in detail
- Identification of machine components
- How to utilise machine power to fill the bucket effectively
- The correct housekeeping necessary to work quickly and efficiently
- How to skim the ground in cleanup operations without excessive down pressure
- How to avoid wheel spin and tyre damage
- All aspects of safety with machine operation
Our one day training course will usually provide novice trainees with sufficient basic skills to earn a statement of attainment in skid steer loader operations. The time required to train people does vary though, depending on your level of hand – eye coordination, and your ability to adapt to new ideas and techniques. Additional training is of course available if required.
After successful completion of your course you will be issued with a Statement Of Attainment and a plastic, wallet sized card stating the unit achieved. All units can contribute towards completion of MNM20105 Certificate II and/or MNM30105 Certificate III in metalliferous mining.
MNCG1060A - Operate Support Equipment – Telescopic Handler
Telescopic Handler courses are run as required at our Guildford training school or at clients premises by arrangement.
;)
Options include:
- Two to three hour assessments for experienced operators.
- One day training and assessment courses designed to impart basic skills to novice operators.
- Tailored training such as refresher courses or specific task techniques.
Our courses typically cover:
- Pre-start check items
- Startup and shutdown procedures
- Dash layout and each function explained in detail
- Identification of machine components
- Correct operation of telescopic boom function and changing of attachments
- How to utilise machine power to fill the bucket effectively
- The correct housekeeping necessary to work quickly and efficiently
- How to skim the ground in cleanup operations without excessive down pressure
- How to avoid wheel spin and tyre damage
- All aspects of safety with machine operation
Our one day training course will usually provide novice trainees with sufficient basic skills to earn a statement of attainment in telescopic handler operations. The time required to train people does vary though, depending on your level of hand – eye coordination, and your ability to adapt to new ideas and techniques. Additional training is of course available if required.
After successful completion of your course you will be issued with a Statement Of Attainment and a plastic, wallet sized card stating the unit achieved. All units can contribute towards completion of MNM20105 Certificate II and/or MNM30105 Certificate III in metalliferous mining.
MNMG237A Work Safely At Heights
Work safely at heights courses are run on a regular schedule, usually straight after our EWP courses at our Guildford training school, but can also be run for groups at client´s premises by arrangement.
;)
Our courses typically cover:
- Certification Requirements
- Duty of care
- Responsibilities
- Inspection of equipment
- Reporting of damage and defects of equipment
- Hazard identification, risk assessment and control
- Environmental factors such as high wind and soft surfaces
- Prevention of falls in the workplace
- Anchorage points
- Minimum clearances
- Planning work and communication/ consulting with co-workers and others
- Operating/ working in public places
After successful completion of your course you will be issued with a Statement Of Attainment and a plastic, wallet sized card stating the unit achieved. All units can contribute towards completion of MNM20105 Certificate II and/or MNM30105 Certificate III in metalliferous mining.
